Plastic Injection Moulds

1. Decade experience; 2. Tolerance: 0.001mm; 3. Strong R&D team; 4. High quality. Injection Mould Manufacturer, Plastic Mould Maker

TECHNICAL SPECIFICATIONS
Type of Mould	Injection mould		Small,medium,large mold
Mold Material	S136, P20, 718H , 2738 , NAK80 ,1.2311 etc
Number of Cavities	1+1, 1+2+1, 2+2, 4+4, Single or mutilcativies
Cycle Time	10-30seconds
Injection Machine	90-1000ton
Life Span of Mould	300k-1000k
Shrinkage	According to material
Product Material	PE, PP, HDPE, PPR, PVC, PP, PS, PET, ABS, PC, etc.
Injection Type	Hot Runner		QTY of Drops
	Cold Runner	Hot Sprue, Sequential Injection
Gate Point	Edge gate, Pin point gate, Subgates, Fan gate, bayer
Ejection	Round Ejector Pin
Slide	Outer, inner slide, lifter
Surface Finish	Tech polish, High gloss, Texture, VDI 3400
Mould Hot Treatment	Tempering, Quending, Nitriding
Main Processing Equipment	Sodick, Seiki, CNC, High Speed Carve , EDM, Wire Cut, Drill

Advantage

1. Precision plastic Injection mould with years’ experience;

2. One stop solution, offer prototyping service, valued added service like: Product assembly, Pad/silk screen printing Ultrasonic/spin welding Sonic stitching, hot stamping and heat sealing;

3. More that 50 machines with advanced equipment from Japan, Strong R&D team;

Advanced equipment, such as CNC Processing center, EDM, wire-cutting, milling machine, grinding machine, lathe, etc.

4. Work with much famous company; Boeing, Carrefour, Motorola, etc. Leading manufacturer for Supermarket display mould and production.

5. Material Expert: your product's best choice for plastic material.

6. Annual Mould Production: 500sets

Mould Making:

1. Material of steelCavity and core use imported S136 stainless steel with fine polishing, high hardness to get mold's high precision and good quality.

2. About gate Pin-valve gate, pneumatic drive the nozzle pin simultaneous high speed open and close action. Which can effectively control the injection hole open and close actions on each cavity? Reliable seal function, smooth moving, low thermal expansion rate, long using life and also saves electric energy.

3. About hot runner 

Hot runner system is designed and made by ourselves, it can achieve ideal and prompt heating effect for perform production, cavity with lower injection pressure to reduce wear and tear of mould parts. 

4. Heat system With double heating system, it has separate temperature control mode, the heat bar are used to heat the mould manifold plate, and small heaters supply the heating temperature for cavity nozzle continuously.

5. Cooling system Each parts including core, cavity and valve gate has independently cooling system.

6. Heat treatment Mechanical treatment cavity and core to prolong service life, nitrogen treatment with neck screw. With fitly operation, guarantee long using life over 2.0 million shots of injection cycle

Factory View:

Moulds Design:

Certifications:

Plastic Injection Moulds